Resolved issues

This topic lists issues resolved for Supply Chain 42.

Issues resolved for App Studio and Macros

Issue Description
App Viewers will no longer see archived apps in App Studio.

Issues resolved for Modeler

Issue Description
Resolved an issue where filters didn't work for the Scenario ID column in output tables.
Resolved a Simulation issue where transport times were not calculated when Transport Time values in Transportation Policies were null. The distance calculation now uses the default model values to calculate the time.
Resolved a Network Optimization issue where problems could occur trying to meet end to end service constraints.
Resolved a Network Optimization numerical issue in calculating the work resource total use hours which was causing unexpected work resource utilization values in the Network Work Resource Summary table.
Resolved a Network Optimization issue where work center step cost information was not reported correctly in the Network Work Center Summary output table.
Resolved a Network Optimization issue to handle duplicate allocation constraints the same as duplicates in other constraint tables.

Changes for prior releases

Issues resolved for Modeler

Issue Description
SCDP 41.3.0 Resolved a Transportation Optimization issue where the solve failed if a location was named "Dummy".
SCDP 41.3.0 Resolved a Network Optimization issue where selection based on groups in Flow Allocation Constraints was favoring higher cost locations.
SCDP 41.2.0 Resolved a Network Optimization issue where Rapid Solve failed due to missing Risk Profile data.
SCDP 41.2.0 Resolved a Greenfield Analysis issue when the case of input data was changed to uppercase for output reporting.
SCDP 41.1.0 Resolved a Safety Stock Optimization issue that was preventing grouped Safety Stock Optimization Constraints from working with the Multi-Echelon Safety Stock Rule.
SCDP 41.1.0 Improvements were made in the Transportation Optimization multi-stop dock door scheduling feature.
SCDP 41.1.0 Resolved a Transportation Optimization issue where a single asset was used in two routes at the same time.
SCDP 41.1.0 Resolved a Network Optimization issue where the cost formulation for spatial expansion was incorrect.
SCDP 41.1.0 Resolved a Network Optimization issue in the reporting of substituted product demand status in the Customer Demand Summary.
Resolved a map issue where filters on the layer grid were not displaying the correct icons on the map.
Resolved a Network Optimization issue where a null Priority value in the Sequential Objectives caused the solve to fail.
Resolved a Network Optimization issue where transportation costs were not calculated correctly when the Fuel Surcharge Basis in Modes or Transportation Policies was set to a unit of measure such as LB.
Resolved an issue were Fixed Resource Cost in Work Resources and Work Resources Multi-Period could not be modified using a Scenario Item.

Issues resolved for Modeler

Issue Description
SCDP 40.4.0 Resolved a Network Optimization issue returning incorrect results for Expression Based Costs with step costs that are not based on Days of Supply.
SCDP 40.3.0 Resolved an issue with the case for group and filter names in Sequential Objectives.
SCDP 40.2.0 Improved how Network Optimization evaluates the modes populated in Flow Constraints with regard to the (ALL_Modes) filter.
SCDP 40.2.0 Resolved a Network Optimization issue involving a mismatch between the DOS basis and Quantity Basis when formulating inventory constraints.
SCDP 40.2.0 Resolved a Transportation Optimization issue where the Assets output table was not populated when using Backhaul Matching with Optimize Fleet Size enabled.
SCDP 40.1.0 Resolved Network Optimization issues in the Network Work Center Summary: negative Step Remaining Capacity values and missing output record for specific work center.
Resolved an issue when multiple Allocation Constraints have no Expression value populated, only the first was written to the input file.
Resolved an issue when one user validates a model table, other users in the same customer see the table validated in other models. Other users now see table validation only if they have the same model open as the one being validated.
Resolved a model display issue when groups were defined with hundreds of thousands of members. The groups can now be successfully displayed in Modeler.
Resolved an issue where results from Inventory Simulation runs were not cleared when re-running the scenario.
Resolved a Network Optimization issue where Work Resource capacity from the Work Resources Multi-Period table was not correctly applied.
Resolved an issue where a bad Group Type populated in a model database prevented groups from being displayed. The group with bad data is no longer included in the groups to display.
Resolved a Network Optimization issue where time-based transportation costs were miscalculated in some cases based on the model's time unit of measure.
Removed "Horizon" as a value from the Work Resource Capacity/Fixed Cost Period column as it is not supported in Network Optimization. "PeriodLength" is used if "Horizon" is populated.
Resolved a Network Optimization issue where duplicate Lane Costs records resulted in an incorrect value for Transportation Policy Cost.
Resolved a Network Optimization issue where the Site Variable Cost was not always correctly written to the input files depending on the unit of measure for the Site Variable Cost Basis.
Resolved an issue in Flow Allocation Constraints where valid values for the Destination and Destination Filter columns did not include site names, site filters, and site groups.
Resolved an issue in Flow Allocation Constraints where valid values for the Source and Source Filter columns did not include customer names,customer filters, and customer groups.

Issues resolved for App Studio and Macros

Issue Description
SCDP 39.2.0 Resolved an issue where exporting from a Grid to an Excel file was resulting in the Excel file reflecting the original table structure rather than the configuration of the table in the Grid widget. This occurred when the "Pivot Result Set" setting was checked on the Advanced tab in the Grid settings.
SCDP 39.2.0 Resolved an issue where exporting from a Grid to an Excel file was including hidden columns in the exported file.
SCDP 39.2.0 Resolved an issue where exporting from a Grid to an Excel file that used user-selected drop-down was exporting the underlying ID values of the user's selection rather than what was displayed in the grid.

Issues resolved for Modeler

Issue Description
SCDP 39.4.0 Resolved a Transportation Optimization issue where two tours using the same asset were occurring simultaneously.
SCDP 39.3.0 Resolved an issue where data tables were not initially displayed after opening a model that required an upgrade using Data Management.
SCDP 39.2.0 Resolved a Network Optimization issue where Split By Ratio parameter values such as 0.698 and 0.302 were not respected.
SCDP 39.1.0 Resolved a Transportation Optimization issue where the "ForceSingleModePerProduct" parameter was being violated.
SCDP 39.1.0 Resolved a Transportation Optimization issue where the Standard Optimization results were not as good as Interleaved Optimization results.
SCDP 39.1.0 Resolved a Network Optimization issue where unnecessary data written for Return Policies table was causing an infeasibility.
SCDP 39.1.0 Resolved a Network Optimization issue where Work Center Constraints were not being respected.
SCDP 39.1.0 Resolved a Network Optimization issue where output data in scientific notation was causing output processing to fail.
SCDP 39.1.0 Updated Network Optimization error reporting when setting the Mode in Customer Demand to "(ALL_Modes)".
SCDP 39.1.0 Resolved a Network Optimization issue where the scaling of constraint values was causing an infeasibility.
Resolved a Cost To Serve Analysis issue where costs for site demand were not correctly accounted for.
Resolved an issue where model expansion was not including all inventory constraints due to a missing key in the expansion logic.
Table filters created on nullable columns before R37 behave differently between SCGX and Modeler. This issue was resolved, but if you encounter filters that do not return expected values, edit them or recreate them in Modeler.

Issues resolved for Data Management

Issue Description
SCDP 39.3.1 Resolved an issue where uploading assets (models, databases, CSV files) 2GB or larger in size is not working.

Issues resolved for App Studio and Macros

Issue Description
Resolved an issue with pivot grids where changes to integer values were not saved.
For Grid widgets, you can now upload an Excel template to use for Edit in Excel.
When a new user is created, user details are now synced successfully with the querying service. This was causing the @@userfullname global parameter to fail when a new user attempted to use it.
When defining App themes, the Button section is now visible from the Style tab.
Resolved an issue with custom colors on tab panels.
Resolved an issue with the Macro Properties Execution History graph when there is a large time difference between the length of macro runs. In that case, the bars for the short-running instances are so small that they cannot be clicked to drill into for more information. A minimum height for the bars has been set so that they are clickable.
Resolved an issue with macros retrieving a value in a scalar query and assigning it to a Local parameter of type string causing an exception.
Resolved an issue where conditional functions were failing when used with Boolean functions looking for a Boolean result (True, False). There was a discrepancy between how the functions were parsed by the Statement Text Editor, how they were calculated in expressions used on macro links, and how they were generated as SQL. The following Boolean functions are consistently returning 1 or 0 instead of True or False: Contains, DoesNotContain, DoesNotStartWith, IsNotNullOrEmpty, IsNullOrEmpty, and StartWith.
Resolved an issue where when a user created a map point in App Studio to represent customers served by a specific source, then duplicated it and changed the copy to another source, the source was also changed in the original map point.

Issues resolved for Modeler

Issue Description
SCDP 38.5.0 Resolved a Network Optimization issue where Total Capital Investment was not populated in the Network Site Summary when using the "Handle Using Logic Constraints" option.
SCDP 38.5.0 Resolved a Network Optimization issue where Infeasibility Diagnosis of a feasible model was returning non-zero values for Constraint Requirement Deviation in the Constraint Summary.
SCDP 38.4.0 Resolved a Network Optimization issue where Total Fixed Operating Cost and Expansion Cost were not correct in the Network Summary and Network Site Summary output tables.
SCDP 38.4.0 Resolved a Network Optimization issue where very small negative values were reported for the Pre Build Inventory in the Network Inventory Summary.
SCDP 38.4.0 Resolved a Transportation Optimization issue where adding dock doors to sites caused the solver to have excessive memory usage.
SCDP 38.4.0 Resolved a Transportation Optimization issue where use of Optimize Fleet Size resulted in more routes with fewer stops on each.
SCDP 38.3.0 Resolved a Network Optimization issue where a Production Constraint with a BOM defined was not correctly respected in the Expression Summary.
SCDP 38.2.0 Resolved a Transportation Optimization issue using dynamic sourcing with single sourcing for customers.
SCDP 38.2.0 Resolved a Network Optimization issue where Site Variable Cost was only applied to the first period in a multi-period model.
SCDP 38.1.0 Resolved a Transportation Optimization issue where shipments were unrouted even when dock doors were available.
SCDP 38.1.0 Improved the error message returned by Transportation Optimization when Hub Optimization encounters locations that serve as the pickup site for some shipments and the dropoff site for others.
SCDP 38.1.0 Resolved a Transportation Optimization issue where long breaks were scheduled early in the route, rather than at the end of the route.
Resolved an issue where groups could not be created when the Technologies mode did not include all technologies.
Resolved an issue with the Site Variable Cost Basis column in the Sites table. If a unit of measure was selected for this column, it was flagged as invalid.
Resolved an issue where displaying two or more map tabs prevented the map from being displayed and resulted in an error.
Corrected the calculation of the Present Value in the Financial Summary where the discount was being applied twice.
Resolved an issue where Inventory Policies Multi-Period records were not written to the input file for Network Optimization. This was related to the Inventory Turns column in the Inventory Policies record using a step cost.
Resolved an issue were data was not included for these tables when the model was expanded: Dispatch Space Assignments, Receiving Space Assignments, Storage Space Assignments, Drone Assignments and Drone Transit Override.
Resolved an issue where filters applied to user defined filters in scenario items were not being evaluated correctly.
Resolved a Cost To Serve issue where Site Variable Cost was not included in the cost reported in the Cost To Serve Details output table.

Issues resolved for Data Management

Issue Description
When a user ends a named session that they did not start, the named session asset will now be deleted from Data Management.

Issues resolved for App Studio and Macros

Issue Description

Resolved the "Call Timeout" error when using the Edit in Excel plugin.

Issues resolved for Modeler

Issue Description
SCDP 37.4.0 Resolved a Network Optimization issue where Site Variable Cost is not calculated correctly when the cost basis is not "Quantity" due to a scaling issue with the "Calibrate Data Before Optimization" option.
SCDP 37.4.0 Resolved a Network Optimization issue where Return Flows are incorrectly generated when the Return Rate and the Return Quantity in the Return Product Ratios Table are set to 0.
SCDP 37.3.0 Resolved a Network Optimization issue where scaling is not applied correctly, which can affect Work Center constraints.
SCDP 37.2.0 Resolved an issue where changes to the model horizon dates are not persisted when updated on the Modeler Launch Pad.
SCDP 37.2.0 Resolved a Network Optimization issue where the "Split By Ratio" Assignment Policy for Bills Of Material is not respected in certain periods.

SCDP 37.2.0 Resolved a Network Optimization issue where the Utilization value is not affecting the space required with spatial modeling.

Note: If your model is infeasible after this change, ensure that the Initial Floor Space value in the Sites table (for sites with spaces assigned) is a positive number.
SCDP 37.2.0 Resolved a Network Optimization issue where used floor space is reported as a negative value with spatial modeling.
SCDP 37.2.0 Resolved a Network Optimization issue where solve time increased significantly for a model with the 36 release compared to the 35 release.
SCDP 37.2.0 Resolved a Network Optimization issue where a scenario is infeasible when the Optimization Objective is Sequential Optimization.
SCDP 37.1.0 Resolved a Network Optimization issue where memory was not released in the case that a scenario solve returned infeasible.
SCDP 37.1.0 Limited the list of design engines in the Cloud Engine dropdown to those for the current model database version only.
Resolved an issue where the NO - IO Conversion is failing due to an out of memory error.
Resolved an issue where model expansion failed to complete.
Resolved a Network Optimization issue where some Sequential Objectives are not written correctly to the input files.
Resolved an issue where the map in Modeler displays stops in an incorrect order.
Resolved a Network Optimization issue where demand penalty costs are not written to output tables as expected.
Resolved a Network Optimization issue where the Minimum Inventory and Maximum Inventory values in Inventory Policies are not being applied to all periods in the model horizon. Note: The resolution to this issue may affect values populated in the Network Summary and other output tables. This change will likely result in additional constraints being applied at the period level, as reported in the Constraint Summary table. In some cases, the increased number of constraints may cause the model to be infeasible. Constraints in Inventory Policies may need to be adjusted to remove the infeasibility.
Resolved an issue where Clear Output Data is not emptying all output tables related to Cost To Serve Analysis.
Resolved an issue where incorrect values result for Transportation Step Costs when using non-default units of measure.
Resolved the case where a user with the Customer Data Administrator role cannot delete models they don't own.
Resolved an issue where map layer data is not displayed if a differentiator is applied to the Transportation Routes or Transportation Route Details layers.

Issues resolved for Demand Modeler

Issue Description
SCDP37.2.0The Download command has been removed for Demand Modeler assets. These assets were failing to download from Data Management.

Issues resolved for Supply Chain Prescriptions

Issue Description

SCDP37.3.0 The Export to Modeler feature now exports values to the appropriate unit of measure in Modeler according to the Business Objective Basis selected in Prescriptions.

SCDP37.3.0 The calculation for Calculated Unit Price for Risk Prescriptions has been changed to be a function of revenue. The new calculation is: 

Calculated Unit Price = Unit Cost / (1 - Profitability Margin)

SCDP37.3.0 The Total Current Cost and Total Potential Cost calculations on the Cost Prescription Detail page now include in-transit inventory costs. Previously, it only included transportation costs.

SCDP37.2.0 Two calculations on the Cost Prescription Detail page have changed:

  • The "Total Potential Savings" column on the Product Insights grid now includes both transportation cost and in-transit inventory cost savings. Previously, the in-transit inventory cost savings was not included.

  • The Rate column on the Product Insights grid now includes only transportation cost savings. Previously, it included both transportation cost and in-transit inventory costs.

Issues resolved for App Studio and Macros

Issue Description

SCDP 36.3.0 Resolved an issue with Edit in Excel where users received a “value must be present” error when attempting to save their bulk updated grid.
Resolved an issue where a tab that is moved loses the ability to be edited or deleted until you navigate away and back from that app board.
Resolved an issue where changing an existing parameter configuration to a Local Variable would still prompt end users for the parameter value. Local Variables should not generate prompts for users.
Resolved an issue where the Map widget was requiring values for Point Maximum Weight, Point Minimum Weight, and Point Multiplier when they were not necessary.
Corrected an incorrect tooltip and corresponding help for the Count() and CountAll() functions. They have been updated to indicate that these functions exclude NULLs in their count. New functions CountZ() and CountAllZ() will include NULLs in their counts.
Resolved a formatting issue with multi-select columns in the Grid widget where the multi-selection box and the column name were left-aligned rather than centered.
Resolved an issue where the App Builder needed to launch an app in the Viewer mode in order to see named session data. The Layout Designer will now automatically display named session data. Note, however, that this may cause a significant delay in opening the App Builder when the session database does not yet exist and needs to be created.
Resolved an issue where the Value Formatting for a StartDate parameter field was not being respected when its macro was run. The list of dates presented to the user in the Parameter field was not in the requested format.
Resolved an issue with the Excel Export action where changing the name of an existing worksheet on the Configure tab of the action was not reflected in the Columns configuration for the worksheet.

Resolved an issue with using the Concat() SQL function in the Statement Text Editor where the function would parse in the editor, but fail when used by the view.
Resolved an issue where using the Sum() function with the DatePart() function in the same view caused the Sum() function to behave as a group by function.
Resolved an issue in the Edit in Excel feature of the Grid widget where deleting rows fails if there is a primary key column in the grid, it is marked in the grid settings as a primary key column, and the column is not the first column in the grid.
Resolved an issue where the Excel Import action was generating an error, but the macro containing the action was ignoring the error.
Resolved an issue where conditional functions were failing when used with Boolean functions looking for a Boolean result (True, False). There was a discrepancy between how the functions were parsed by the Statement Text Editor, how they were calculated in expressions used on macro links, and how they were generated as SQL. The following Boolean functions are consistently returning 1 or 0 instead of True or False: Contains, DoesNotContain, DoesNotStartWith, IsNotNullOrEmpty, IsNullOrEmpty, and StartWith.
Resolved an issue with the Preview section of the Insert macro action.
Resolved an issue with the Bulk Update in Grid widgets.

Issues resolved for Modeler

Issue Description
SCDP 36.4.0 Resolved a Network Optimization issue where return flows are sent to a closed site.
SCDP 36.4.0 Resolved a Network Optimization issue where Termination settings are ignored and the solve finishes before reaching the time limit and relative gap values.
SCDP 36.4.0 Resolved a Network Optimization issue where the platform results fail to import into the model and the result values are different than in SCGX.
SCDP 36.4.0 Resolved a Network Optimization issue where the solve gets stuck processing end to end service constraints.
SCDP 36.4.0 Resolved a Network Optimization failure in the "Formulating single process related to constraints" step.

SCDP 36.3.0 Resolved issues where map layers do not display data when a differentiator is applied. This has been resolved for both "Category" and "Scale" differentiators.

Note: Differentiators currently apply to table results of 50,000 records or less.
SCDP 36.3.0 Resolved an issue where models could not be shared from the list view in Modeler.
SCDP 36.3.0 Resolved incorrect Spanish translations for column names that caused table import to fail.
SCDP 36.3.0 Resolved an issue where table imports were failing when the browser language was not English.
SCDP 36.2.0 Resolved a Network Optimization issue where the Unit Price Override in the Site Demand table was not applied correctly.
SCDP 36.2.0 Resolved a Network Optimization issue where flow count constraints could be violated with single site sourcing.
SCDP 36.2.0 Resolved an issue where the GuruAuditLog.txt file was not generated during Network Optimization
SCDP 36.2.0 Resolved a Network Optimization issue where work center constraints were not reported accurately in the Constraint Summary table.
SCDP 36.2.0 Resolved a Greenfield Analysis issue where sub-scenario IDs were not populated correctly in the Greenfield Analysis output tables.
SCDP 36.1.0 Resolved an issue where the name of a user defined column was no longer displayed after adjusting the width of the column.
Corrected a behavior that prevented the Cost To Serve Location Summary layer from being available in Maps in some models.
Improved map display especially in cases of maps with large numbers of records that previously could not load.
Resolved an issue where filter names and/or criteria defined with Japanese characters was not handled correctly during input file generation for Network Optimization.
The PlannerAllowed column has been removed from the ScenarioFields table in the model schema to prevent incorrect behavior for scenario items created via the API.
Resolved an issue where Site Variable Cost was not populated in Network Optimization output tables such as Network Site Summary and Financial Summary.
Resolved an issue where an invalid date was displayed while uploading models in list view.
Resolved an issue with validation filters (Invalid, Valid) on input tables that caused all records to be exported, not the filtered set. This behavior was also corrected for the records affected by Update Column.
Updated Transportation Optimization so that the Priority column in Shipments is supported in Interleaved as well as Standard routing.
Resolved a Transportation Optimization issue where the Max Duty Time constraint was violated in Backhaul Matching.
Resolved a Transportation Optimization issue where the Transportation Asset Summary reported more assets than were available.
Corrected Network Optimization behavior for the Sourcing Policy column in the sourcing policies tables when set to either "Multiple Sources(Split By Ratio)" or "Multiple Sources(Probability)". This applied when using Policy Parameter values of 0 or null.
Resolved issues with Site Other Spaces and Site Storage Spaces input tables in which groups and units of measure were handled incorrectly during input file generation for Network Optimization.
Resolved an issue where filtering for date/time values in tables displayed a series of errors until the criteria contained a valid date.
Resolved an issue where the validation filter value was not displayed in the table footer Filters area for input tables.

Issues resolved for Demand Modeler

Issue Description
SCDP36.1.0 Resolved an issue where the demand history line and the demand forecast line did not connect on graphs. The previous graph created an illusion that there was data missing from the chart.
DDM Import no longer fails when the source data includes duplicate records. The DDM Import process will now import only the first record when duplicate records exist.
The help icon in the Demand Modeler interface now accesses the Demand Modeler help.

Issues resolved for Supply Chain Prescriptions

Issue Description
SCDP 36.3.0 Node Skipping prescriptions will now match “Source”, “Destination” and “Product” for a lane rather than just matching “Source” and “Destination”. If a lane matches the Source, Destination, and Product values of any flow constraint in Modeler, Prescriptions will “exclude” that flow constraint and include the prescription.

On the Path Insights dashboard for individual prescriptions, the "Top 5 factors increasing <business objective>" chart was displaying the bottom five factors increasing the business objective costs. It will now review all positive global scores and display the top five from the list.

The "Top 5 factors decreasing <business objective>" chart was displaying the top five factors increasing the business objective costs. It will now review all negative global scores in descending order (most negative first) and display the top five from the list.
On the Path Insights dashboard for individual Node Skipping prescriptions, the path with the highest amount of savings is now listed first in the Affected Paths table. Previously, the path with the lowest Path ID was listed first.
The help icon in the Prescriptions interface now accesses the Prescription help.

Issues resolved for Model Building

Issue Description
Resolved an issue where a recipe defined with filters using wildcards prevented the Generate Recipe Workspace Tables from working.

Issues resolved for Queue Management

Issue Description
Corrected behavior on the Logs tab when quickly scrolling that caused the log to no longer display. Also added AM/PM to the timestamp in the log.
Removed the extra copy of the log file that was included in the queue log zip file.
Resolved an issue where the left nav of the Logs tab was occasionally out of sync with the logs that were displayed.

Issues resolved for Administration

Issue Description
Resolved an issue where LLama.ai users with Customer Data Admin role were not able manage user groups.

Issues resolved for the Supply Chain API

Issue Description
If the Share endpoint is called repeatedly before a Create/Copy action is complete, the cache keeps renewing for 30 seconds. The cache is now no longer renewed and the Share will succeed as soon as the asset is available.

Issues resolved for App Studio and Macros

Issue Description
SCDP-35.1.0 Resolved a bug with manual manual joins where the list of available columns (when adding columns or in the Statement Editor) includes the joins rather than the fields. This affects the Insert action, Grid widgets, and Drop Down widgets.
Resolved an issue where the Connections field in Macros was not loading for some macro actions. This was caused by a limit on the number of connections. The fix removes sessions from the drop-down list of connections.
Resolved an issue where editing a ToString function with the Statement Text Editor caused an error when the Format field was null.
Resolved an issue where editing the Run Data Guru Project action's parameters with the Statement Text Editor would fail.
Resolved an issue where the Preview tab of the Update macro action was prompting for parameter values that are not required for the preview.
Resolved an issue where the Preview tab of the Update macro action was generating incorrect warning message regarding dependencies.
Resolved an issue where the Preview tab of macro actions was erroneously reporting an error "StartIndex cannot be less than zero. (Parameter 'startIndex')"
Resolved an issue where the Preview tab of the Update macro action acting on a DDM reported an error "Object reference not set to an instance of an object." The macro action would complete successfully, but the error was reported.

Issues resolved for Demand Modeler

Issue Description
SCDP35.3.0 Resolved an issue where filtering the Trend Cloud causals automatically deselected previously selected causals.

Issues resolved for Modeler

Issue Description
SCDP 35.5.0 Improved performance in various model building and population sections of the Network Optimization solve.
SCDP 35.5.0 Resolved an issue where Driver Scheduling was not scheduling routes when run on the platform. Routes are now scheduled as expected.
SCDP 35.5.0 Resolved an issue where Transportation Optimization was using more transportation assets than the number of available assets. The constraint is now correctly respected.
SCDP 35.5.0 Resolved a Transportation Optimization issue where inbound hub optimization failed when a DC received shipments from the hub.
SCDP 35.5.0 Resolved a Transportation Optimization issue where the periodic schedule was infeasible for some destinations.
SCDP 35.3.0 Resolved an issue where the Site Variable Cost and Space Expansion Cost were not being reported in the Network Summary and the Network Site Summary. For Supply Chain Guru X models, you can cloud solve to get the updated solver behavior.
SCDP 35.3.0 Updated the NO-IO Conversion task configuration to increase available memory. This change prevents conversion failures due to out of memory errors.
SCDP 35.2.0 Updated the generation of a Network Optimization sites input file to help during the model building stage in solving.
SCDP 35.1.0 Resolved a Transportation Optimization issue where constraints to force through a hub were being violated.
Resolved an issue where Multi-Echelon Inventory Simulation was failing to run.
Resolved an issue where a Safety Stock Optimization Constraint was not being written when only the Minimum Inventory Level or the Maximum Inventory Level was provided. You no longer need to provide both the minimum and maximum values.
Corrected an issue where Work Center group values in Production Process Constraints were not being expanded when the model was run.
Corrected the behavior when Flow Constraints use “(ALL_Sites) (All)”. This value is no longer evaluated as Sites plus Customers; it now applies only to Sites.
Corrected the behavior where Open/Close Relations constraints were ignored when using Work Center constraints with the Period set to greater than Period_002.
Resolved issues where Modeler cannot import data into model tables when the browser language is Japanese.
Resolved an issue when importing Inventory Policies data into Modeler failed due to Review Period values (such as “1 HR”) being flagged as invalid.
Resolved an issue where updating a filter failed after clearing criteria from one or more filtered columns.
Resolved an issue where the Sites Fixed Closing Cost value was not written to the input file when Network Optimization was run.

Issues resolved for Supply Chain Prescriptions

Issue Description
SCDP 35.5.0 Improved the export to model processes for Node Skipping to only exclude the flow constraints that match the affected lanes by source-destination. This was necessary to have the Node Skipping prescriptions included in the Network Optimization solve.
SCDP 35.5.0 Improved the export to model processes for Mode Switching and Volume Consolidation to exclude flow constraints that match a prescription’s source, destination, affected products, and mode. This is necessary to have the Mode Switching or Volume Consolidation prescriptions included in the Network Optimization solve.
SCDP 35.5.0 Resolved an issue where the Affected Lanes prescription was not appearing on the Node Skipping dashboard map that shows the results of the prescription.
SCDP 35.3.0 Resolved an issue where there was a mismatch between the number of scenario runs shown in the "Scenario prescriptions summary" and "Scenario prescriptions details" view level tables and the database tables.
SCDP 35.3.0 Resolved an issue where the Export to Modeler process was not copying the source scenario items into the new Modeler scenario it created.
SCDP 35.3.0 Resolved an issue where scenario item definitions were incorrect in some cases.

Issues resolved for the Supply Chain API

Issue Description
If the Share endpoint is called repeatedly before a Create/Copy action is complete, the cache keeps renewing for 30 seconds. The cache is now no longer renewed and the Share will succeed as soon as the asset is available.

Issues resolved for Administration

Issue Description
Resolved an issue where LLama.ai users with Customer Data Admin role were not able manage user groups.

Issues resolved for App Studio and Macros

Issue Description
34.2.0 Global Parameters were not available to the Run DG Project action.
34.0.1 Group Joins no longer return "Invalid Column Name" errors.
34.0.1 App Studio no longer returns an error when referring to a join statement in a grid.
Edit in Excel now allows the user to add a record when the grid is empty and a read-only column with a default value is present in the grid.
Apps can now be shared in environments with many users who have complex permissions.
When searching for table names on the Manage Manual Joins page, typing part of a name in a column’s search box will filter the list of available table names.
You can now export an app with assets when you do not have access to some of the assets. The confirmation email will now let you know that an asset was skipped because it was unavailable.
Icon widgets with long names will now display properly.
The Insert command will now copy data between databases (UDDM, DDM, and models) on different instances of SQL Server.
Multiple macros running concurrently were opening named sessions with the same name, which caused a failure. Best practice is to use a common session that is created before execution.
Resolved an issue where deleted assets still appeared in Data Management. When users attempted to connect to the deleted assets using macro actions, their macro actions would fail.

Issues resolved for Modeler

Issue Description
SCDP 34.6.0 For Network Optimization, the Fixed Shipment Cost from the Transportation Policies Multi-Period table is not written to the input file.
Input file generation has been updated to correctly write the Fixed Shipment Cost, not the Variable Transportation Cost as was previously mapped.
SCDP 34.3.0 When solving using Safety Stock Optimization, the warnings and errors are not being written to the Safety Stock Optimization Error Log output table. The solver has been updated to resolve this issue.
SCDP 34.3.0 When using Shipment Constraints with Transportation Optimization, some shipments were missed during shipment combination, leading to unrouted shipments with misleading reasons. The solver has been updated to resolve this issue.
Table filters on Boolean columns are not evaluated correctly, specifically when the filter value is "No". This is now evaluated correctly.
Add new record to Products reports a "nonBit" error for the Hazardous Goods column. Adding new records to Products has no errors.
In some cases, filters for scenario items are not initially displayed. Also column names are displaying the back end (database) name. Scenario items are now displaying the information correctly.
Further aligned the Network Optimization C# solver with the legacy solver.
Improved the stability of the Cost to Serve algorithm.
Fixed issues with conditional minimum constraints in Network Optimization.
Fixed issues related to spend constraints in Network Optimization.

Issues resolved for the Supply Chain API

Issue Description
If the Share endpoint is called repeatedly before a Create/Copy action is complete, the cache keeps renewing for 30 seconds. The cache is now no longer renewed and the Share will succeed as soon as the asset is available.

Issues resolved for App Studio

Issue Description
Edit in Excel now allows user input within defined rules under validation.
Views and joins from DDMs/data models can now be downloaded.
Chrome users with Chinese (Traditional) set as their language were experiencing errors running macros.
Nested macros will now pass variables to called macros.
Macro users can now configure Run Data Guru Project actions.
Modeler macro users can now access their connections list.
Resolved an issue with copying and pasting macros in App Studio.
The Run Excel Export action will now work with app parameters.
Resolved an error with Edit in Excel caused by lookup columns that don’t return any lookup data. Validation has been added to handle the error.
Resolved an issue with an API call to a trigger macro producing an error.

Issues resolved for Modeler

Issue Description
SCDP 33.6.0 Model import timeouts have been increased and made configurable to address an issue where import of a large .csv file failed due to a timeout threshold.
SCDP 33.4.0 Models cannot be shared from within Modeler.
SCDP 33.3.0 Table filters with characters such as Japanese are not evaluated correctly in Modeler.
SCDP 33.2.1 Models with Japanese names fail to upload to Modeler.
Infeasibility Diagnosis is not using the C# solver.
The solver fails due to constraint that references an excluded workcenter.
Incorrect values in Network Work Center Summary for Total Remaining Capacity and Total Capacity Utilization.
An issue with Infeasibility Diagnosis caused a model solve to fail.
An incorrect negative cost warning is displayed with Network Optimization
When you set a Network Optimization time limit and select the "Continue until at least one solution is found" option, the solve fails to populate a solution if the time limit is reached.
Solver stability issues occur when running Sequential Optimization problems in Network Optimization.
Network Optimization C# solver output is not always aligned with legacy solver output.
Issues with negative costs and step costs impact Network Optimization models.
Some models fail to solve due to increased Network Optimization solver memory usage.
For some models/scenarios, the output failed to be read in after a solve.
Constraint Type for Transportation Process Constraints always written as "Min".
When the browser language is set to Deutsch, the two Benutzerdefiniert columns have been updated so they have unique names: Benutzerdefiniert 1 and Benutzerdefiniert 2. This change is reflected in all tables that include the columns, such as Kunden and Standorte.

Issues Resolved for Demand Modeler

Issue Description
SCDP 33.6.0 Incorrect column mappings for location and product when populating the demand_forecast table in the Decision Data Model (DDM).

Issues Resolved for Supply Chain API

Issue Description
SCDP 33.3.0 When using the POST /v4/model/{modelId}/scenarioItems/bulk request, the isDefaultValue setting was not being set to 1 for one item resulting in invalid scenario items. This issue is now resolved.

Issues resolved for App Studio

Issue Description
Inserting or selecting table columns with a manual join present caused the statement to return incorrect data. The statement would duplicate columns and include all of the tables joined to the specified table. It now only includes data from the table you specify.
Macro users were prompted to select an import file when an unlinked 'Run Excel Import' action existed in a macro. This would happen when the user either ran the macro or ran a specific action within the macro.
The Map background did not display properly with a horizontal orientation.
In Bulk Updates, the date component was decremented by one when the keyed-in date format was MM/DD/YY instead of MM/DD/YYYY.
Edit in Excel drop-down fields were not updated when the drop down fields in the table were empty.
The Icon widget was displaying the icon and its corresponding descriptive text on separate lines instead of on a single line.
When an infeasible Network Optimization model was included in an app with the Run NO Action, the app would behave as though the model run was successful. This prevented building guardrails around infeasible models. With this release, when the model is infeasible and not able to solve/populate outputs, the Run NO Model action will now not be considered successful.

Issues resolved for Modeler

Issue Description
SCDP 32.4.0 Solver stability issues occur when running Sequential Optimization problems in Network Optimization.
SCDP 32.4.0 Network Optimization C# solver output is not always aligned with legacy solver output.
SCDP 32.4.0 Issues with negative costs and step costs impact Network Optimization models.
SCDP 32.4.0 Model building performance needs improvement with the Network Optimization C# solver.
SCDP 32.1.0 A null value for Series Offset Time in Customer Demand causes Simulation to fail. Simulation runs successfully if the value is 0.
SCDP 32.1.0 If Cancel If Late is set to Yes in Customer Orders or Customer Demand, the demand is still fulfilled when past due using new Simulation.
SCDP 32.0.1 Post-processing steps at the conclusion of the solve is taking significantly longer to run in llama.ai than in Supply Chain Guru X.
When the navigation pane is unpinned, the Maps and Graphs panes do not collapse when clicking off the navigation pane.
Filters applied to the Scenario Name and Allocated Annual Volume columns in the Sourcing Events table are not working.
When solving, models occasionally hit concurrency issues when processing the results.
The Total Ending Book Value and Accumulated Depreciation values are not written to the Network Summary output table with Network Optimization.
The Safety Inventory is not written to the Network Inventory Summary output table if Inventory Constraints included Site groups using "All".
Returns with no Return Product Ratio data for a specific customer-product combination in one period causes unbounded ratios if data exists for other periods.
The CO2 calculation for Transportation Optimization is incorrect if the CO2 Basis in Transportation Assets uses units of measure that are not model defaults.
The Transportation Optimization parameter.csv file is missing options if the Problem Type is set to "Auto-Detect" and the solver uses the Periodic Optimization problem type.
A Policy Parameter of 0 for a Site Sourcing Policy using Split By Ratio causes an error in the Demand Analysis calculation for source sites.

Issues resolved for Data Management

Issue Description
 

Issues resolved for Queue Management

Issue Description
 

 

Issues resolved for App Studio

Issue Description
SCDP 31.3.0 When the Vertical Alignment option for Icon widgets was set to Top, the widget displayed the icon in the center of the widget panel, not at the top.
SCDP 31.1.1 Macros may fail when attempting to add model assets to sessions.
Many Statement Editor functions now work without the specified tables having a primary key. See Statement Editor Functions for more information.
'Editable If' allows OR and AND conditions but results in an error. The OR and AND conditions can now be used.
Grid column grouping is lost if the column name changes.
The formatting of dates for display and for editing (one used YY year and the other used YYYY) did not match.
Widgets set to ignore empty context are not populating after adding context.
The Run Excel Export does not support spaces in the worksheet names.

Issues resolved for Modeler

Issue Description
SCDP 31.3.0 Scenario is not the first column in the Route Summary output table.
SCDP 31.1.1 A number of Transportation Optimization output tables are not displayed after running one or more scenarios.
SCDP 31.1.0 NO to IO Conversion fails during model expansion.
Unable to import Input Tables from an Excel template due to empty columns.
Shipment costs are incorrectly prorated when the Shipment Rule (in Modes or Transportation Policies) is set to "Treat Shipment Cost as Fixed".
Total Inventory Holding Cost is not populated in the Transportation Summary output table when running Transportation Optimization.

Issues resolved for Data Management

Issue Description
SCDP 31.4.0 Tags missing from grid after upgrading to R31.
SCDP 31.4.0 Remove all stored procedures, functions, and views when a uddb is uploaded.

Include all stored procedures, functions, and views when a uddb is copied or moved.

User cannot share a decision data model (DDM) in Supply Chain if that user is not the original owner of the DDM
Uploaded image asset does not appear in Data Management, but subsequent attempts to upload the image result in an error message stating that the file already exists.

Issues resolved for Queue Management

Issue Description
SCDP 31.3.0 On Logs tab of queue details, default log displayed not set to log of latest step worked on or completed.

Issues resolved for Model Building

Issue Description
SCDP 31.5.0 For some Decision Data Models, the grids on the recipe Scope tab for the various elements display the columns in an unexpected order.
SCDP 31.3.0 When editing a recipe, if you cancel from the Aggregation tab, you are prompted to save or discard changes even when no changes have been made.
SCDP 31.3.0 If the segmentation for Advanced Aggregation uses a column with a filter applied, editing the filter resulted in incorrect segment values. Editing the filter now prompts to either discard the Aggregate By settings or cancel the filter change.
SCDP 31.3.0 The Number of Days field for Rolling Horizon on the Scope tab is not wide enough to display 4 or more characters.

Issues resolved for Administration

Issue Description
Licensing Administrators cannot create a new user.

Issues resolved for App Studio

Issue Description
SCDP 30.3 Items in tabs were rotating or moving to different locations in widgets in user environments.
The user can't access the title bar options when a grid with a large or complex data source is loading.
Grid column conditional formatting is lost if the column's name is a parameter value and the parameter value is changed.
Global parameters @@rangevalue1 and @@rangevalue2 do not work in XY Chart labels.

App Studio grids do not filter Time data properly.
The llama.ai Statement Editor doe not allow the user to add constants to a statement.

Issues resolved for Modeler

Issue Description
SCDP 30.3 Simulation solving queues could be stuck in "Waiting" status with no way to cancel the queue.
Geocoding results in an error when browser language setting uses Spanish and other non-English languages.
Return Policy Cost does not apply when using "Closest to Destination" as the Return Policy.
CO2 calculation is incorrect when using Zone Cost Definitions with a Step Type of "Incremental".
Split sourcing on the Customer Sourcing Policies Multi-Period table is not respected in Modeler.
Email notification for import incorrectly shows successful row counts for tables with errors.
Option name misspelled in Advanced Settings of Network Optimization.

Issues resolved for Queue Management

Issue Description
SCDP 30.4 When a solve queue is being canceled, but the Design Engine is stopped, this queue and other queues may not cancel successfully.
SCDP 30.3 Non-admin users unable to view queues created from assets that have been deleted.
SCDP 30.3 Non-Customer Admin users unable to view model queue logs.

Issues resolved for Administration

Issue Description
SCDP 30.3 Fix authorization issues preventing Customer Administrators from viewing solve logs

Issues resolved for the Supply Chain API

Issue Description
SCDP 30.1 Upsert requests previously failed if they were attempted immediately after a database was replaced in Supply Chain. This issue is now resolved.

Last modified: Thursday April 17, 2025

Is this useful?